Juzo Reversa Compression Wrap Extender Strap – Adds 10 cm

Product Description

The Juzo Reversa Compression Wrap Extender Strap provides additional room when the standard strap length on a compatible Juzo compression wrap is not sufficient.

Each extender adds approximately 10 cm or 4 inches to the selected strap, helping expand the size range around a specific area of the limb. This makes it useful when body circumference varies, swelling fluctuates or additional overlap is required for secure fastening.

Four extender widths are available—75, 85, 95 and 105 mm. The selected width must correspond with the strap and fastening components on the existing Juzo wrap.

The reversible beige-and-black construction coordinates with compatible Juzo Reversa wraps and allows either colour to face outward. The extender is an accessory only and does not provide therapeutic compression independently.

Juzo specifically identifies wrap extenders as an available accessory for its Reversa compression wrap system.

Key Features

• Adds approximately 10 cm of extra strap length
• Helps expand the fit range of a compatible Juzo wrap
• Available in four strap widths
• Designed to coordinate with current Juzo wrap straps and fasteners
• Reversible beige-and-black construction
• Can be applied to a selected area requiring additional circumference
• Helps maintain adequate strap overlap
• Easy hook-and-loop attachment
• Reusable medical compression accessory
• Suitable for select upper- and lower-extremity Juzo wraps

Benefits

Provides Additional Adjustment

Adds extra fastening length where the original compression-wrap strap does not provide enough overlap.

Supports Changes in Circumference

May accommodate fluctuating limb measurements or areas requiring additional strap length.

Targeted Extension

An extender can be added to the specific strap that requires more room rather than replacing the entire compression wrap.

Coordinates with Juzo Reversa Wraps

The reversible black-and-beige design complements compatible wraps in the Juzo Reversa system.

Helps Preserve an Existing Wrap

A properly selected extender may allow a compatible wrap to continue fitting when only a small amount of extra strap length is required.

Technical Specifications

The model, additional length, width choices and colours are confirmed on Juzo’s official product page.

Size and Variant Options

75 mm

Designed for an existing Juzo wrap strap and fastener measuring approximately 75 mm wide.

85 mm

Designed for an existing Juzo wrap strap and fastener measuring approximately 85 mm wide.

95 mm

Designed for an existing Juzo wrap strap and fastener measuring approximately 95 mm wide.

105 mm

Designed for an existing Juzo wrap strap and fastener measuring approximately 105 mm wide.

Important: These measurements refer to the width of the existing strap and fastener—not the customer’s limb circumference.

Recommended Shopify Variants

Create one Shopify product with these variants:

A separate colour selector is probably unnecessary because each extender is reversible.

What Is Included

• One Juzo Reversa Compression Wrap Extender Strap in the selected width

Confirm whether your supplier packages these individually or in pairs before publishing the package quantity.

Not included:

• Juzo compression wrap
• Liner
• Hip attachment
• Additional extender widths
• Other compression accessories

Compatibility

Designed for compatible straps on current Juzo Reversa compression wraps.

Potentially compatible wrap areas may include:

• Calf wraps
• Foot wraps
• Knee wraps
• Thigh wraps
• Arm wraps
• Hand wraps

Compatibility depends on the exact width and fastening design of the existing strap. Juzo states that the 75, 85, 95 and 105 mm sizes correlate with the straps and fasteners on current wraps.

Do not describe the extender as universally compatible with every Juzo garment or with compression wraps from other manufacturers.

How to Select the Correct Size

1. Lay the existing Juzo wrap strap flat without stretching it.
2. Measure the strap’s width in millimetres.
3. Check the corresponding hook-and-loop fastening area.
4. Select the matching 75, 85, 95 or 105 mm extender.
5. Confirm compatibility with a trained compression fitter before use.

Do not choose the extender based on the circumference of the arm or leg.

How to Use

1. Apply the compatible Juzo compression wrap according to its instructions.
2. Identify the strap that requires additional length.
3. Connect the matching extender to the existing fastening section.
4. Wrap the extended strap around the limb.
5. Fasten it smoothly with adequate overlap.
6. Confirm that the extender is flat and securely attached.
7. Check that there are no folds, gaps, pressure points or exposed hook material.
8. Reassess comfort, circulation and compression-wrap positioning.

The extender should not be used to compensate for a substantially incorrect wrap size.

Care Instructions

• Close all hook-and-loop fasteners before washing.
• Place the extender in a laundry bag where possible.
• Wash on a gentle or delicate cycle at 40°C or below.
• Use a mild detergent suitable for compression garments.
• Do not use fabric softener.
• Do not use shampoo as a washing product.
• Do not bleach.
• Do not wring.
• Air dry away from direct sunlight and heat.
• Follow the product label if its instructions differ.

Juzo advises closing fasteners before washing, using a gentle cycle at no more than 40°C and avoiding fabric softener because it may damage compression materials.

Inspection and Replacement

Inspect regularly for:

• Reduced hook-and-loop grip
• Fraying
• Stretching
• Torn stitching
• Curling edges
• Damaged fastening material
• Persistent detachment during use
• Loss of secure strap overlap

Replace the extender when it no longer remains securely attached or cannot maintain the intended fit.

Safety Information

• This extender does not provide compression by itself.
• Use only with a compatible Juzo compression wrap.
• Select the width that exactly matches the existing strap.
• Professional fitting is recommended.
• Do not use an extender to correct a severely undersized garment.
• Do not join several extenders together unless specifically directed by a qualified professional.
• Avoid leaving exposed hook material against the skin.
• Do not overtighten the compression wrap after installing the extender.
• Stop use and seek professional guidance if pain, numbness, tingling, skin discolouration, irritation or increased swelling occurs.
• Compression levels and treatment plans should be determined by a qualified healthcare professional.

Frequently Asked Questions

How much length does the extender add?

Each Juzo Reversa Wrap Extender adds approximately 10 cm, or just under 4 inches, to an existing strap.

What sizes are available?

The extenders are available in 75, 85, 95 and 105 mm widths.

What does the millimetre size measure?

It refers to the width of the extender and the corresponding strap and fastener—not the circumference of the wearer’s limb.

Is the compression wrap included?

No. This listing is for the extender strap only.

Does the extender provide compression?

No. It extends the fastening length of a compatible compression wrap. The compression effect comes from the properly fitted wrap system.

Can it be used with a Juzo calf wrap?

Juzo identifies the wrap extender as an available accessory for its Reversa calf wrap. The correct extender width must still be confirmed.

Is it reversible?

Juzo lists beige and black as available colours. The wider Reversa system uses a reversible black-and-beige design.

Can I attach two extenders together?

That is not confirmed by Juzo’s public product page. Use a single correctly selected extender unless a trained fitter or Juzo specifically recommends otherwise.

Will it fit another brand of compression wrap?

Compatibility with other manufacturers is not confirmed and should not be advertised.

Should I order the same width as my wrap strap?

Yes. The extender width should correspond with the strap and fastener width on the existing Juzo wrap.